产品资料

奥林巴斯5072PR脉冲发生器

如果您对该产品感兴趣的话,可以
产品名称: 奥林巴斯5072PR脉冲发生器
产品型号: 5072PR
产品展商: 美国奥林巴斯
会员价格: 0.00 元
产品文档: 无相关文档

简单介绍

5072PR,5073PR,5077PR 5072PR,5073PR,5077PR 5072PR,5073PR,5077PR 深圳华清仪器特价代理5072PR,5073PR,5077PR脉冲发生器 深圳华清仪器特价代理5072PR,5073PR,5077PR脉冲发生器 深圳华清仪器特价代理5072PR,5073PR,5077PR脉冲发生器 奥林巴斯5072PR脉冲发生器 奥林巴斯5072PR脉冲发生器


奥林巴斯5072PR脉冲发生器  的详细介绍

产品型号 

PULSER 5072PR 5073PR 5077PR
Pulse Type 
(main bang):
Negative Negative Impulse Negative Square Wave
Rise Time 
(10% to 90%):
Typically 5 ns, 10 ns max Typically <2 ns

波音bbin_波音博彩_波音澳门百家乐 www.carzvuk.com Typically <10 ns, 20 ns max 
(rise and fall time)

Available Pulse Voltage: 
(no load) 

-360 V -180 V Select -400 V, -300 V, -200 V, -100 V
Available Pulse Energy: 13, 26, 52, or 104 μjoules 2, 4, 8, or 16 μjoules N/A
Damping: Select 15, 17, 20, 25, 36, 50, 
100, or 500 ohms
12, 14, 17, 20, 25, 33, 50, or 
100 ohms
N/A
Pulse Width: N/A N/A 10 preset fixed widths: 15-20,10, 7.5, 5.0-6.0, 3.5-4.0, 2-2.25, 1.0, 0.5, 0.25, 0.1 MHz. 
Variable +/-25% fine vernier tuning for each width.
Mode: Pulse Echo or Thru-Transmission
Isolation (53 dB min): Typically 62 dB at 10 MHz Typically 62 dB at 50 MHz Typically 62 dB at 10 MHz
Pulse Repetition Rate: 
(Internal)
100, 200, 500, 1000, 2000, or 5000 Hz 200, 500, 1000, 2000, 5000, 10000, or 20000 Hz

100, 200, 500, 1000, 2000, 5000 Hz, except that maximum PRF is limited to: 2000 Hz FOR 0.5 MHz tranducers, 1000 MHz for 0.25 MHz transducers, and 50 Hz for 0.1 MHz transducers.

Pulse Repetition Rate: 0-6 kHz 
(External)
0-10 kHz 0-5 kHz (observe limitations of PRF versus pulse width)
Synch Output Pulse: 3 V into 50 ohms
External Trigger Input: 
(in series with 10 Kohms)
2.4 V into 1000 PF 
200 ns minimum pulse width
2.4 V into 1000 PF 
200 ns minimum pulse width
2.4 V into 1000 PF 
50 ns minimum pulse width
RECEIVER 5072PR 5073PR 5077PR
Maximum Bandwidth: 
(-3 dB, RL=50 ohms)
1 kHz - 35 MHz 1 kHz - 75 MHz 1 kHz - 35 MHz
Voltage Gain: 0-59, 1 dB steps (RL=50 ohms) 0-39, 1 dB steps (RL=50 ohms) 0-59, 1 dB steps (RL=50 ohms)
Phase: inverting or non-inverting (internal switch)
Attenuator Range: 0-59, 1 dB steps (RL=50 ohms) 0-49, 1 dB steps (RL=50 ohms)

0-49, 1 dB steps (RL=50 ohms)

High Pass Filter: 1 kHz (out) or 1 MHz 1 kHz (out) or 5 MHz 1 kHz (out) or 1 MHz
Low Pass Filter: 35 MHz (out) or 10 MHz 75 MHz (out) or 20 MHz 35 MHz (out) or 10 MHz
Noise: 70 μV pk-pk typical, referred to input, BW=35 MHz 200 μV pk-pk typical, referred to input, BW=75 MHz 70 μV pk-pk typical, referred to input, BW=35 MHz
Max Signal Output: +/-1V pk., terminated in 50 ohms
Input Resistance: 
(Thru-Transmission)
500 ohms linear range 
100 ohms > linear range
100 ohms linear range 
50 ohms at levels > linear range
500 ohms
Output Impedance: 50 ohms 50 ohms 50 ohms
Maximum Input Power: 400 mW 400 mW 500 mW
UNIT 5072PR,5073PR,5077PR
Input/Output: External Trigger In, Sync Out, RF Out, T/R and R: All BNC female connectors
Power Main Requirements:

100/120/220/240 VAC, 50/60 Hz

Operating Temperature: 0-50°C
Size and Weight: 7" W x 3.5" H x 9.1" D (178 mm x 89 mm x 232 mm); 5 lbs (2.3 kg)

ORDERING INFORMATION: Each model is shipped with a power cord and operator manual. Transducers and cables are sold separately. 
Our sales department is available to discuss your application in detail and to assist with transducer selection.

*All specifications are subject to change without notice.

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!